Performance Series Thermal Imagers
Menus
21
Center Box
For models TiS50, TiS55, TiS60, and TiS65, the Center
Box feature is an adjustable temperature measurement
zone (box) that you can center on the infrared image. This
zone (box) expands and contracts to different levels within
the infrared image. The zone lets the user see an
approximate maximum (MAX), average (AVG), and
minimum (MIN) temperature measurement in that area.
When in AUTO Level and Span mode, the Imager
automatically sets the level and span according to the
infrared scene within the parameters of the Center Box.
To enable or disable the Center Box feature:
1. Push 2.
2. Push W/X to highlight Measurement.
3. Push 1 or Z to view the menu.
4. Push W/X to highlight Center Box.
5. Push 1 or Z to view the menu.
6. Push W/X to toggle the function ON or OFF.
To set the size of the Center Box when enabled:
1. Push W/X to highlight Set Size.
2. Push 1 or Z to view the display.
3. Push Z to increase the size of the Center Box.
4. Push Y to reduce the size of the Center Box.
5. When satisfied with the size of the Center Box, push:
• 2 to set the change and go back to the
previous menu.
• 3 to cancel the change and go back to the live
view.
To Next Page
Loading...
