Fluke TiS10 - Set High-Temperature Color Alarm; Set Low-Temperature;Dew Point Color Alarm

Performance Series Thermal Imagers
Menus
25
Set High-Temperature Color Alarm
To set a high-temperature color alarm:
1. From the Color Alarm menu, push W/X to
highlight the option: Set High Alarm.
2. Push Z to open the Color Alarm menu.
3. Push W/X to adjust the temperature setting.
4. Push:
• 1 to set the change and go back to the live
view.
• 2 or Y to set change and go back to the
previous menu.
• 3 to cancel the change and go back to the live
view
Set Low-Temperature/Dew Point Color Alarm
To set a low-temperature/dew point color alarm:
1. From the Color Alarm menu, push W/X to
highlight Set Low Alarm.
2. Push Z to open the Color Alarm menu.
3. Push W/X to adjust the temperature setting.
4. Push:
• 1 to set the change and go back to the live
view.
• 2 or Y to set the change and go back to the
previous menu.
• 3 to cancel the change and go back to the live
view.
Outside/Inside Alarm
If you set values for the high-temperature color alarm and
a low-temperature color alarm, the Imager will have the
options for inside or outside isotherm color alarms.
To set an outside/inside isotherm color alarm:
1. From the Color Alarm menu, push
W/X to
highlight Outside or Inside.
2. Push:
• 1 to set the change and go back to the live
view.
• 2 or Y to set the change and go back to the
previous menu.
• 3 to cancel the change and go back to the live
view