Need help?Do you have a question about the Fluke TS 30 and is the answer not in the manual?
General| Measurement Functions | Continuity |
|---|---|
| Weight | 0.53 kg |
| Storage temperature | -20 °C to 60 °C |
| Accuracy | Not applicable |
| Resolution | Not applicable |
| Continuity indicator | Audible tone & LED |
Describes the TALK/MONITOR switch function for on-hook and off-hook modes.
Details the 12 standard and 4 special purpose keys and their functionality in Talk mode.
Explains the function of dialing keys in Tone and Pulse modes.
Explains the purpose and indication of the Green and Red LEDs.
Instructions for monitoring telephone lines with the TS30 Test Set.
Guides on how to make calls using Tone or Pulse dialing.
Explains the timed hook flash signal provided by the FLASH key.
Describes using Pulse then Tone dialing for specific line setups.
Details how to redial the last dialed number and memory capacity.
Explains how to check line polarity using the POLAR key and LEDs.
Instructions on using the MUTE key to reduce ambient noise interference.
Guides on how to receive incoming calls on the test set.
Provides steps for replacing a damaged or worn belt clip.
To Next Page
