Fluke T+ User Manual

T+/T+PRO English Instruction Sheet
Page 1
®
T+ and T+ PRO
Electrical Tester
Instruction Sheet
Introduction
The Fluke T+ and T+ PRO Electrical Testers (the “Tester”) have
the following features:
• AC and dc voltage measurement, 12 V to 600 V, with or
without batteries
• LED bar voltage and hazardous voltage indicators function
with or without batteries
• Vibration and beeper indicators for ac and dc voltages
• Beeper and LED continuity indication
• Backlit LCD displays measured voltage (T+ PRO only)
• Rotary field direction indicators (T+ PRO only)
• Resistance measurement up to 9.99 kΩ (T+ PRO only)
• Flashlight
• GFCI trip
Additional languages of this instruction sheet (Brazilian
Portuguese, Simplified Chinese, Japanese, Korean, and Thai) are
available for download at www.fluke.com
.
Contacting Fluke
To contact Fluke, call one of the following telephone numbers:
USA: 1-888-44-FLUKE (1-888-443-5853)
Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: +31 402-675-200
Japan: +81-3-3434-0181
Singapore: +65-738-5655
Anywhere in the world: +1-425-446-5500
USA Service: 1-888-99-FLUKE (1-888-993-5853)
Or, visit Fluke's Web site at www.fluke.com
.
To register this product, visit register.fluke.com
PN 2559547 November 2006 Rev. 1, 9/07
© 2006, 2007 Fluke Corporation. All rights reserved. Printed in China.
1.800.868.7495info@Fluke-Direct.ca
Fluke-Direct.ca

Fluke T+ Specifications

General

Brand	Fluke
Model	T+
Category	Test Equipment
Language	English

Summary

Introduction and Contact Information

Introduction

Overview of the Fluke T+ and T+ PRO Electrical Testers and their features.

Contacting Fluke

Provides telephone numbers and contact details for Fluke customer support.

Safety Information

Product Details and Operation

Symbols

Explanation of symbols used on the Tester and in the instruction sheet.

Optional Accessories

Lists available accessories for the T+/T+ PRO Electrical Tester.

Pushbuttons

Describes the function of each pushbutton on the Tester.

Understanding the Display

Details the various display indicators and their meanings on the T+ PRO.

Beeper and Vibration

Explains beeper tones for voltage/continuity and vibration for voltage indication.

Automatic Operation and HOLD

Describes automatic power-on, mode selection, and the HOLD function.

Probe Tip Removal and LED Voltages

Instructions for removing probe tips and differences in LED display voltages.

Self Test Procedure

Guidelines for performing a self test before using the Tester.

Measuring Voltage

Procedure for measuring AC and DC voltages with the Tester.

Testing for Continuity

Instructions on how to perform continuity tests.

Measuring Resistance (T+ PRO Only)

Procedure for measuring resistance using the T+ PRO model.

GFCI Test

Detailed steps for testing Ground Fault Circuit Interrupter receptacles.

Rotary Field Direction (T+ PRO Only)

Procedure for determining rotary field direction in three-phase systems.

Maintenance and Specifications

Maintenance and Battery Replacement

Instructions for cleaning the Tester and replacing batteries.

Specifications

Technical specifications including operating conditions, safety, and accuracy.

Limited Warranty