Flymo EasiLife 200 - Page 30

6. Use the arrow buttons to set the date format
and then push the BACK button.
3.10.14.2 To set the language
1. Do steps 1–3 in To get access to the menu
on page 23 .
2. Use the arrow buttons and the OK button to
move through the menu structure Settings >
General > Language.
3. Use the arrow buttons to select language
and then push the BACK button.
3.10.14.3 To set the country
1. Do steps 1–3 in To get access to the menu
on page 23
.
2. Use the arrow buttons and the OK button to
move through the menu structure Settings >
General > Country.
3. Use the arrow buttons to select country and
then push the BACK button.
3.10.14.4 To set the unit format
1. Do steps 1–3 in
To get access to the menu
on page 23 .
2. Use the arrow buttons and the OK button to
move through the menu structure
Settings >
General > Unit format.
3. Use the arrow buttons to select unit format
and then push the BACK button.
3.10.14.5 To reset all user settings
1. Do steps 1–3 in
To get access to the menu
on page 23 .
2. Use the arrow buttons and the OK button to
move through the menu structure
Settings >
General > Reset all user settings
.
3. Use the right arrow button to select Proceed
with reset of all user settings?
4. Push the OK button to reset all the user
settings.
Note:
Security level, PIN code, Loop signal,
Messages, Date & Time, Language and Country
settings are not reset.
3.10.14.6 The About menu
The
About menu displays information about the
product, for example serial number and firmware
versions.
30
- Installation
1392 - 001 -