Focal Utopia Be Series User Manual

Crossblock installation
Warning
When using Crossblock in bi-
wiring or biamplification, you
must remove the 4 jumpers
backside, if you don’t, you can
damage amplifiers (fig. 1). Keep
them on for monowiring.
Mounting
To access to Crossover fixing holes,
remove the fixing screws (fig. 2).
Fix Crossblock with the four screws
provided on a perfectly flat area
(fig. 3). Please bear in mind that you
must keep enough space at the back
of the Crossblock to easily access
the cables.
17
English
notice utopia be car gb 17 26/04/07 10:14:11

Focal Utopia Be Series Specifications

General

Frequency Response	50Hz - 40kHz
Size	6.5 inches
Woofer Cone	W Sandwich Cone
Crossover	Passive
Type	Component Speakers