Need help?Do you have a question about the Focal Utopia Be Series and is the answer not in the manual?
General| Frequency Response | 50Hz - 40kHz |
|---|---|
| Size | 6.5 inches |
| Woofer Cone | W Sandwich Cone |
| Crossover | Passive |
| Type | Component Speakers |
Special handling advice for the Beryllium dome tweeter to avoid risks.
Information about potential hearing damage from high volume levels.
Explanation of the necessary break-in period for optimal speaker performance.
Guidance on optimal placement of tweeters for stereo imaging and staging.
Instructions for installing tweeters using the surface mounting kit.
Instructions for installing tweeters using the flush mounting method.
Guidance on ideal locations for woofers in vehicles for optimal sound.
Guidance on ideal locations for midranges for better staging.
Key considerations for securely mounting woofers and midranges.
Step-by-step instructions for mounting the woofer.
Step-by-step instructions for mounting the midrange.
Describes the monowiring connection method.
Describes the biwiring connection method.
Describes the biamplification connection method.
Explains the monowiring setup for N°7 Crossblock.
Explains the biwiring setup for N°7 Crossblock.
Explains the biamplification setup for N°7 Crossblock.
Caution regarding correct phase wiring to avoid performance issues.
Warning about removing jumpers for bi-wiring or biamplification.
Steps for securely mounting the Crossblock.
Adjusts the low-pass frequency value for the crossover.
Adjusts midrange level to correct for losses.
Adjusts the hi-pass frequency value for the crossover.
Adjusts the output level for the tweeter.
Configures low-pass frequency and includes optional boost.
Adjusts the hi-pass frequency for the midrange/tweeter.
Sets the output level for the midrange driver.
Sets the output level for the tweeter driver.
Wiring instructions for N°5 and N°6 active kits.
Wiring instructions for the N°7 active kit.
Procedure for installing the 13 WS subwoofer.
Procedure for installing the 21 WX subwoofer.
Important advice on correct polarity for subwoofer connections.
Discusses the optimization of subwoofers for sealed enclosures.
Discusses the suitability of bass-reflex enclosures for specific models.
Instructions for inverting the subwoofer mounting.
Technical drawings and measurements for the TBe tweeter.
Technical drawings and measurements for the 3 W2 Be midrange.
Technical drawings and measurements for the 5 W2 Be woofer.
Technical drawings and measurements for the 6 W3 Be woofer.
Technical drawings and measurements for the 13 WS Be subwoofer.
Technical drawings and measurements for the 21 WX Be subwoofer.
To Next Page