Focusrite Scarlett 2i2 Studio - Physical and Electrical Details

20
THD+N
<0.002% (maximum level, -1 dBFS input, 1 kHz, with 20 Hz/22
kHz bandpass filter)
Output impedance <1 ohm
Physical and Electrical Characteristics
Analogue Inputs
Connectors XLR “Combo” type: Mic/Line/Inst (Inputs 1-2) on front panel
Mic/Line switching Automatic
Line/Instrument switching 2 x front panel switches or via Focusrite Control
Phantom power
Shared 48 V phantom power switch for inputs 1 & 2
(XLR connections only)
AIR function Front panel switch or via Focusrite Control
Analogue Outputs
Balanced outputs 2 x ¼” TRS jacks on rear panel
Stereo headphone output ¼” TRS jack on front panel
Main output level control
On front panel
Headphones level control
Other I/O
USB 1 x USB 2.0 Type C connector
Front Panel Indicators
USB power Green LED
Gain Halos
Tri-colour LED rings (concentric with GAIN controls)
Phantom power Red LED
Instrument mode 2 x red LEDs
AIR mode 2 x amber LEDs
Direct Monitor mode 2 x green LEDs
Weight and Dimensions
W x H x D
175 mm x 47.5 mm x 99 mm
6.89 in x 1.87 in x 3.89 in
Weight
470 g
1.04 lb