Foley 653 ACCU-Master - Spin Grinding Procedure

35
OPERATION
STEP 3: SPIN GRINDING
PRESS SPIN GRIND
TO CONTINUE.
1. PLUNGER PIN and rotate the
FINGER AND BODY ASSEMBLY

PLUNGER PIN
FIG. 46.
2. 
the RELIEF FINGER ASSEMBLY. 
GRINDING WHEEL
RELIEF FINGER ASSEMBLY

3. NOTE: Use the 3.5" x 1" [89 mm x 25 mm] grinding
wheel to achieve the necessary clearance on smaller
reels, such as 5" [127 mm] diameter greensmowers.
FIG. 47
FIG. 48
GRINDING HEAD POSITIONS SPIN/RELIEF
The FINGER AND BODY ASSEMBLYGRINDING HEAD rotates on the GRINDING HEAD HOUSING
FINGER AND
BODY ASSEMBLY,PLUNGER PINGRINDING HEAD HOUSING
FINGER AND BODY ASSEMBLY
rotates the FINGERS FINGER AND BODY ASSEMBLY
FINGERS
PLUNGER PINRELIEF ADJUSTER PLUNGER PIN
RELIEF ADJUSTER, rotate the ASSEMBLY
PLUNGER PIN
 FIXED FINGER


NOTE: Unlock LOCK HANDLE to raise or lower FIXED
FINGER to match grinding wheel wear.
FIG. 46