Foley 653 ACCU-Master - Spin Speed Adjustment

40
OPERATION
SPIN SPEED AJDUSTMENT
NOTE: SPIN DRIVE RPM in spin grinding is very important to achieving a quality grind. The Accu-Touch
3 Control inially establishes a spin speed based on the reel manufacture and cung unit informaon
that was input. Generally, the SPIN DRIVE RPM for spin grinding will be between 180 RPM and 380 RPM.
However, for all reels, there is an opmum SPIN SPEED where there is an AGGRESSIVE, yet SMOOTH grind.
CONTROL and then
SPIN SPEED
 SPIN SPEED

SPIN SPEED


SPIN SPEED 

SPIN SPEED to a

SPIN SPEED 

INCREASE SPIN SPEED
DECREASE SPIN SPEED
FIG. 60