To Next PageTo Next PageWhy is my Follett 12CI425A-LI Water Dispenser not dispensing water?
If your Follett Water Dispenser isn't dispensing water, there are a few potential causes. It could be a faulty water solenoid valve, which would need to be replaced. Another possibility is a faulty dispense switch, which would also need replacement. Finally, ensure the power switch is on and functioning correctly; if it's faulty, replace it.
How to fix a Follett 12CI425A-LI that does not dispense ice?
If your Follett Water Dispenser isn't dispensing ice, there are several possible reasons: 1. The power switch might be off or faulty. Check the switch and turn it on, or replace it if it's not working. 2. The dispense switch could be faulty. If so, replace the switch. 3. There might be a wheel motor malfunction. Check the motor and replace it if necessary.
Why does the ice machine in my Follett 12CI425A-LI run continuously?
If the ice machine in your Follett Water Dispenser runs continuously, the issue might be a faulty or incorrectly positioned bin stat. Check its positioning. If the stat doesn't open when ice is placed on the capillary tube, you'll need to replace the stat.
Why does the dispense wheel on my Follett 12CI425A-LI Water Dispenser rotate continuously?
If the dispense wheel in your Follett Water Dispenser rotates continuously, it's likely that the dispense switch contacts are burned out. The solution is to replace the dispense switch.
General| Brand | Follett |
|---|---|
| Model | 12CI425A-LI |
| Category | Water Dispenser |
| Language | English |
Pre-installation checks and guidance for unpacking and inspecting the equipment.
Details on electrical, ambient, plumbing, ventilation clearances, and dry weight.
Instructions for installing countertop units without legs, including utility routing.
Explanation of how the automatic-load ice and water dispensers function.
Description of SensorSAFE infrared dispensing technology and its features.
Guidelines for periodic cleaning, descaling, and sanitizing of the ice machine and dispenser.
Overview of the four functional systems of the ice machine and troubleshooting approach.
Detailed explanation of the continuous freezing and ice harvesting process.
Schematic illustrating the main electrical connections for the ice dispenser.
Specific wiring diagram for models with lever dispensing.
Specific wiring diagram for models with SensorSAFE infrared dispensing.
Description of the normal start-up and ice-making cycle stages.
Troubleshooting steps for high gearmotor amperage errors.
Diagnosing issues like loss of water and high refrigerant pressure.
Diagram of the refrigeration cycle and tables for pressure and temperature data.
Information on refrigerant charge, replacement, and how to test ice production capacity.
Guides for troubleshooting common problems with lever and SensorSAFE models.
Steps for removing the dispense wheel and wheelmotor.
Procedure for taking apart and putting back together the evaporator assembly.
Instructions for replacing the gearmotor and fan assembly.
Guidance on replacing the thermostat and ice transport tube.
List of replacement parts for the dispenser exterior components.
Replacement parts for the wheelmotor and drive system.
Replacement parts for dispense chute and splash panel on lever models.
Replacement parts for dispense chute and splash panel on SensorSAFE models.
List of replacement parts for various ice machine internal components.
Replacement parts for electrical control boards, switches, and thermostats.
Replacement parts for the compressor unit, including capacitors and relays.
List of replacement parts for the evaporator assembly.
Replacement parts for water supply connections and drain systems.
Catalog of water filter systems and cleaning supplies for the dispensers.
