To Next PageTo Next PageWhy Follett 50CI400A Water Dispenser does not dispense ice?
There are several possible causes: 1. The power switch might be off or faulty. Check the switch, turn it on, or replace it if it’s faulty. 2. The dispense switch might be faulty. If so, replace the switch. 3. The wheel motor might have a malfunction. Check the motor and capacitor, and replace them if needed.
Why Follett Water Dispenser ice machine runs continuously?
The bin stat might be faulty or incorrectly positioned. Check for proper positioning. If the stat does not open when ice is placed on the capillary tube, replace the stat.
What to do if Follett 50CI400A does not dispense water?
There are several potential reasons: 1. A faulty water solenoid valve. Replace the water solenoid valve. 2. A faulty dispense switch. Replace the dispense switch. 3. The power switch is off or faulty. Check the switch, turn it on, or replace it if faulty.
What to do if Follett Water Dispenser dispense wheel rotates continuously?
The dispense switch contacts are burned out, replace the dispense switch.
General| Model | 50CI400A |
|---|---|
| Cooling System | Air-cooled |
| Voltage | 115V |
| Material | Stainless Steel |
| Type | Water Dispenser |
| Ice Production | 400 lbs/day |
Provides an introduction to Follett equipment and company contact details.
Details physical dimensions, electrical, plumbing, and clearance requirements.
Essential checks and preparations before installing the unit.
Instructions for installing countertop models with various utility connections.
Procedures for mounting dispensers on walls, including sink requirements.
Schedule for routine cleaning of drain lines, filters, and dispenser components.
Procedures for daily cleaning of drain pans and monthly tasks for condensers and filters.
Comprehensive guide for cleaning and descaling the ice machine and dispenser.
Explains functional systems and the step-by-step icemaking process.
Guides for removing and replacing dispenser and ice machine components.
Steps to safely remove the ice machine from the dispenser unit.
Detailed procedures for disassembling and reassembling evaporator and gearmotor.
Identifies the placement of key electrical components within the unit.
Schematic detailing electrical connections for lever-actuated dispensers.
Schematic detailing electrical connections for SensorSAFE dispensers.
Important information regarding power, safety, and operational indicators.
Step-by-step breakdown of the ice machine's normal operational cycles.
Explains error codes and operational stages indicating potential issues.
Visual representation of the refrigerant flow and key components.
Ice production capacity based on ambient and water temperatures.
Details on refrigerant type, charge amount, and replacement guidelines.
Common dispenser issues and corrective actions for different models.
Identifies ice machine problems, indicators, and solutions for various faults.
Illustrated parts list for the external components of the dispenser.
Parts breakdown for chute and splash panels for lever models.
Parts list for dispenser electrical boxes in lever models.
Illustrated parts for SensorSAFE chute and splash panels.
Parts list for dispenser electrical boxes in SensorSAFE models.
Illustrated parts list for the dispenser's drive mechanism.
Components related to water supply and drainage connections.
Detailed parts breakdown for the ice machine's evaporator assembly.
Illustrated parts list for air-cooled ice machine models.
Illustrated parts list for water-cooled ice machine models.
Illustrated parts list for the ice machine's electrical components.
