9
Getting Started
Initial Setup
Please follow the initial setup procedure before using the device for the rst time
or after you have replaced the battery. When the battery power is extremely low
and “ & ” appears on the screen, the meter cannot be turned on.
Step 1: Enter the Setting Mode
1. The meter turns on automatically once a new battery is inserted.
2. Start with the meter off (no test strip inserted). Press and hold and at the
same time.
Step 2: Conguring the Settings (Date, Time, Universal Tone, Memory
Deletion and Reminder Alarm)
Press or to adjust the value or enable/disable the setting. Then press MAIN
button to conrm the setting and switch to another eld.
Set [Minute]
Set [Year] Set [Month] Set [Day] Set [Hour]
Set [Beep
On, Universal
Tone, Beep
Off]
Delete Memory
Records
To Next Page
Loading...
