22
Please remember:
• Number can be advanced faster by holding down the M button.
• While setting speaking volume, number 0 indicates that the speak-
ing function is off. “ ” will not display. Numbers 1 to 7 indi-
cate speaking volume from low to high. They will be displayed
together with “ .”
• If the monitor does not contain speaking function, it will automati-
cally shut down after Step 8.
• Step 8 and Step 9 are only for users who desire to use speak-
ing function.
• The time, date and unit of measurement can ONLY be changed
in the setting mode. Therefore, these parameters cannot be chang-
ed while performing tests.
To Next Page
Loading...
