18
If you want to turn off an alarm, nd the alarm number by pressing
SET in the setting mode, press
to change from “ON’ to “OFF”.
At the time of your alarm, the meter will beep and automatically turn
on. You can press
to silence the alarm and insert a test strip to
begin testing. If you do not press
, the meter will beep for 2
minutes then switch off. If you do not want to test at this time,
press
to switch off the meter.
Congratulations! You have completed all settings!
NOTE
• These parameters can ONLY be changed in the setting mode.
• If the meter is idle for 3 minutes during the setting mode, it will switch off
automatically.
To Next Page
Loading...
