Fora V30 - Important Control Solution Information

46
Important Control Solution Information
• Use only FORA control solutions with your meter.
• Do not use the control solution beyond the expiry date or 3
months after rst opening. Write the opening date on the control
solution vial and discard the remaining solution after 3 months.
• It is recommended that the control solution test be done at
room temperature (68°F to 77°F / 20°C to 25°C). Make sure your
control solution, meter, and test strips are at this specied
temperature range before testing.
• Shake the vial before use, discard the rst drop of control solution,
and wipe off the dispenser tip to ensure a pure sample and an
accurate result.
• Store the control solution tightly closed at temperatures between
35.6°F and 86°F (2°C and 30°C). Do NOT freeze.