EasyManuals Logo
Home>Force>Garage Door Opener>FS Series

Force FS Series User Manual

Force FS Series
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
IMPORTANT SAFETY INSTRUCTIONS
1. Intended Use:
The garage door operator is designed exclusively for impulse operation of spring-balanced Sectional and
Up & Over garage doors doors in private / non-commercial operations. Door systems used in a public
area have only one protective device, e.g. the force limiter, and may only be operated under supervision.
The garage door operator is designed for operation in dry rooms.
2. Unintended Use:
The garage door operator must not be used for purposes other than for the automation of garage doors.
Continuous operation and the use in the commercial sector is not permitted. The operator must not be
used with doors without fall protection.
3. Qualification of the fitter and installer
Only correct fitting and maintenance by a competent / specialist company or a competent / qualified
person in accordance with the instructions can ensure the safe and flawless operation of the assembly. A
competent person is, in accordance with EN 12635, considered a person who has appropriate training,
qualified knowledge and practical experience in order to mount a door system properly and safely, and
maintain.
4. Safety instructions for installation, repair, maintenance and disassembly of the door system
DANGER!
Compensation springs are under high tension.
The adjusting or loosening the compensating springs can cause serious injuries! If necessary,
maintenance and repair work should only be performed by an expert! Never attempt to replace, readjust,
repair, or move the balancing spring for the counterbalancing of the door or their holders. Also inspect
that the entire door system (pivots, door bearings, ropes, springs and fastenings) for wear and possible
damage. Check them for signs of rust, corrosion and cracks. Error in the door system or misaligned
doors can cause severe injury! Do not use the door system if repair or adjustment work needs to be
done!
Mains Voltage
Dear Customer
Thank you for choosing a quality product from Force. Thanks to our unique quality
management system, we continuously ensure that Force operators meet the highest
standards of quality and comfort. Thank you for your confidence in purchase and we wish you
much pleasure with your new Force garage door opener.
Declaration of Conformity (CE)
The FS and PLUS series garage door openers from Force meet the requirements of the
applicable European and national guidelines. Compliance was demonstrated that
corresponding declarations, certificates, test reports and documents have been obtained by
the manufacturer and can be requested if required.
27

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Force FS Series and is the answer not in the manual?

Force FS Series Specifications

General IconGeneral
BrandForce
ModelFS Series
CategoryGarage Door Opener
LanguageEnglish

Related product manuals