Ford 1997 Ranger - Page 122

29. Connect front stabilizer bar to lower control arms. Install new stabilizer bar link nuts and tighten to 16-
24 Nm (12-18 lb-ft).
30. Reinstall front brake calipers to steering knuckle as outlined in Section 06-03 .
31. Reconnect fuel lines along left frame rail near engine mount as outlined in Section 03
-04B .
32. Install front wheel and tire assemblies on rotors. Install and tighten wheel lug nuts to 115-155 Nm (85-
114 lb-ft).
33.
Connect electrical connector for heated oxygen sensor (HO2S).
Page
13
of
18
1997 Aerostar/Ranger
2011
-
04
-
27
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31B39.HTM~gen~ref.HTM
tomsn048@gmail.com