Ford 1997 Ranger - Page 35

aluminum gouges easily.)
2. Position a new gasket on water pump sealing surface using Gasket and Trim Adhesive D7AZ-
19B508-B or equivalent meeting Ford specification ESE-M2G52-A to hold gasket in position.
3. Install water pump on engine front cover and hand-tighten 12 attaching bolts. Refer to Engine Front
Cover in this section for tightening specifications.
4. Reinstall lower radiator hose at water pump and radiator and tighten clamps.
5. Reinstall power steering pump support bracket to engine and torque to (5 fasteners) (Ranger) 48-61
Nm (35-45 lb-ft) or (3 fasteners) (Aerostar) 40-54 Nm (30-40 lb-ft).
Power Steering Support Bracket — Aerostar
Item
Part
Number Description
1 3A674 Power Steering Pump
2 3C511 Power Steering Pump Support
3 N800199-
S309
Bolt
4 3A733 Power Steering Pump Pulley
5 6B209 Drive Belt Tensioner
6 N606068- Bolt
Page
4
of
11
1997 Aerostar/Ranger
2011
-
04
-
27
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31B20.HTM~gen~ref.HTM
tomsn048@gmail.com