Ford 1997 Ranger - Page 61

Install push rod, rocker arm, rocker arm seat (6A528), and rocker arm bolt for valves:
 Cylinder No. 1 Exhaust
 Cylinder No. 2 Intake
 Cylinder No. 3 Exhaust
 Cylinder No. 3 Intake
 Cylinder No. 4 Exhaust
 Cylinder No. 5 Intake
 Cylinder No. 6 Exhaust
 Cylinder No. 6 Intake
Tighten rocker arm bolts to 11 Nm (8lb-ft).
24. For valves in above step, check rocker arm-to-valve clearance. Clearance should be 2.15-4.69mm
(0.084-0.184 in.).
Camshaft Position B — Rocker Arm, Push Rod, and Fulcrum Installation
Item
Part
Number Description
1 — Centerline
2 — Camshaft Sprocket Timing Mark at Two o'Clock
Position
3 — Crankshaft Sprocket Timing Mark at 4:30 Position
4 6564 Rocker Arm (No. 1 Exhaust Rocker Arm and Parts)
5 6564 Rocker Arm (No. 2 Intake Rocker Arm and Parts)
6 6564 Rocker Arm (No. 3 Exhaust Rocker Arm and Parts)
7 6564 Rocker Arm (No. 3 Intake Rocker Arm and Parts)
8 6564 Rocker Arm (No. 6 Exhaust Rocker Arm and Parts)
9 6564 Rocker Arm (No. 6 Intake Rocker Arm and Parts)
10 6564 Rocker Arm (No. 5 Intake Rocker Arm and Parts)
11 6564 Rocker Arm (No. 4 Exhaust Rocker Arm and Parts)
Page
6
of
10
1997 Aerostar/Ranger
2011
-
04
-
27
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31B23.HTM~gen~ref.HTM
tomsn048@gmail.com