The cargo divider is designed to
divide your pickup box in half or
rotate 90° to allow you full use of
the pickup box.
To rotate the cargo divider 90°:
• Open front panel.
• Pull the lower release lever out
on each side of the cargo divider
to unlatch from the pickup box.
• Rotate the divider 90° parallel
with the tonneau cover and
secure it to the pickup box with
the lower release levers.
To rotate the cargo divider back,
follow the procedure in reverse order.
To remove the cargo divider:
• Open the front panel.
• Pull two release levers out on
each side of the cargo divider
from the pickup box and remove.
For installation of the cargo divider,
follow the removal procedure in
reverse order.
Driver Controls
61
To Next Page
Loading...
Need help?
General
