1. Unlatch and lift the seat out of the tub
in the floor by squeezing and pulling up
on the handle. Once the seat is at a
vertical position, push the seat over,
letting it fall onto the latches.
2. To return the seatback to the upright
position, pull the red strap. Then while
holding the red strap, pull the long
strap located on the seatback to raise
the seatback.
3. Pull the head restraints up to their
normal positions.
PowerFold™Third Row Seats (If
equipped)
The third row power seat buttons are
located behind the third row seats on the
left-hand quarter trim panel.
NORMAL: Press to return the seat to the normal seating position.A
STOW: Press to stow the seat into the tub floor.B
153
Explorer (TUB), enUSA, First Printing
Seats
To Next Page
Loading...
