15
Tipper Controls
Use: Tipover mode:
To open tailboard:
• Push against the top of the tailboard
with one hand, with the other hand
use an index finger or forefinger to
release the latch, by first pulling up to
approximately 90 degrees from the
vertical.
• Using the palm of your hand push up
on the handle until it is almost vertical
and the latch is released.
• Repeat the action for the other latch.
Maintain pressure on the tailboard
until it is safe to lower gently.
To close tailboard:
• Brush away debris from the tailboard,
specifically the edges and two upper
latch pins. Clear the vertical edges of
the body corner and horizontal rear
edge of the tipper bed.
• Grab the lower edge of the tailboard
with both hands and rotate upwards
to its closed position.
• Return the latches to their closed
position by pushing down on the
handle with the palm of one hand and
supporting the tailboard with the
other. Maintaining pressure on the
tailboard repeat for 2nd latch.
• Grasp tailboard by the top edge and
pull to ensure it is secure.
To Next Page
Loading...
Need help?
General
