Configuration Overview
Item Description
Display Visual VM - Opens visual voicemail, allowing
the user to control voicemail from the phone (Default
setting).
Accessory
The accessory section configures the following settings:
Item Description
Headset Key Configure what happens when the headset key is
pressed or if the Answer softkey is pressed while the
handset is onhook:
Switch – pressing headset key will switch between
headset and other audio options.
Headset Priority – pressing the Answer softkey will
activate the headset instead of speaker.
EHS Headset Enable EHS (Electronic Hookswitch), for use with
compatible headsets.
USB Headset Enable headset support through the USB port.
Bluetooth Enable and scan for Bluetooth headsets.
Connecting a bluetooth headset
To connect a bluetooth headset:
1. Go to Setting > Accessory > Bluetooth.
2.
Ensure Bluetooth is set to Enabled.
3. Press Scan softkey.
4. Select discovered Bluetooth device and press Pair softkey.
Disconnecting a bluetooth headset
To connect a bluetooth headset:
1. Go to Setting > Accessory > Bluetooth.
2.
Select the connected Bluetooth device.
3. Press Disconnect softkey.
Programmable key
Configure the programmable keys that are on the sides of the screen using the following settings:
Fortinet 3.0.2 FON-480 User Guide 22
Fortinet Technologies Inc.
To Next Page
Loading...
