Configuration Overview
Item Description
Programmable Key Select the programmable key to configure.
Type Select the action to take when the key is pressed:
l None – nothing will happen when key is
pressed.
l Park – ongoing call will be parked.
l Call Forward – opens the Call Forward settings.
l Line – display status of active calls on the
phone.
l Intercom – activate an intercom call.
l Extn Appearance – display status of selected
extension. Press key to place call to selected
extension.
l Line Appearance – display status of selected
line. Press key to place call from selected line.
l Park Appearance – display status of selected
parking orbit. Press key to answer call in parking
orbit.
l Speed Dial – configure number to dial when key
is pressed.
Label Enter label to display on selected programmable key.
Line Select line to perform selected action on.
Parameter Used to configure value for: Extn Appearance, Line
Appearance, Park Appearance, Speed Dial.
Network
Configure the network parameters of the phone.
IP Mode
The IP Mode will display the current IP mode of the phone (IPv4, IPv6). Selecting the IP mode configures:
Item Description
IP Mode Select between DHCP (default) and Static.
IP Address (Static setting) Configure IP address.
Subnet Mask (Static setting) Configure subnet mask.
Default Gateway (Static setting) Configure default gateway.
Fortinet 3.0.2 FON-480 User Guide 23
Fortinet Technologies Inc.
To Next Page
Loading...
