Using your Phone
1.
Dial the outgoing access code (for example: 9 or 0) if configured within the Fortivoice.
2. Dial the phone number. After about 4 seconds, the phone will dial the number. Optionally, press OK, the
Dial softkey or # to place the call immediately.
Dialing a number from the History
To dial a number from the History
1. Press the History softkey.
2. Select a History entry and press the Dial softkey.
Dialing a Contact
To dial a Contact
1. Press the Contact softkey.
2.
Select the Contact section you would like to dial from.
3.
Select a contact to dial.
4. Press the Dial softkey.
By default, all calls will use the speakerphone. Lift the handset if you wish to place a call using the handset.
Press if you wish to place a call using a headset.
.
Call features
The phone has a variety of features that can assist you in your communication needs.
Redialing
Allows you to redial the last number dialed:
l
Press . The phone activates the speakerphone and places the call.
l
You can also lift the handset or press followed by pressing .
Hold
To place calls on hold press the Hold softkey. While a call is on hold you can answer or place other calls. The
held party will hear music, if configured to do so on the FortiVoice.
To toggle between two calls, use the navigation keys and press the Answer or Resume softkey.
Fortinet 3.0.2 FON-480 User Guide 29
Fortinet Technologies Inc.
To Next Page
Loading...
