EasyManua.ls Logo

Fortinet FortiGate FortiGate-200A

Fortinet FortiGate FortiGate-200A
392 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System status Status
FortiGate-200A Administration Guide 01-28006-0072-20041105 29
Changing unit information
Administrators with system configuration write access can use the unit information
area of the System Status page:
To change FortiGate host name
To update the firmware version
To update the antivirus definitions manually
To update the attack definitions manually
To change to Transparent mode
To change to NAT/Route mode
To change FortiGate host name
The FortiGate host name appears on the Status page and in the FortiGate CLI
prompt. The host name is also used as the SNMP system name. For information
about the SNMP system name, see “SNMP” on page 98.
The default host name is FortiGate-200A.
1 Go to System > Status > Status.
2 In the Host Name field of the Unit Information section, select Change.
3 In the New Name field, type a new host name.
4 Select OK.
The new host name is displayed in the Host Name field, and in the CLI prompt, and is
added to the SNMP System Name.
To update the firmware version
For information on updating the firmware, see “Changing the FortiGate firmware” on
page 32.
To update the antivirus definitions manually
1 Download the latest antivirus definitions update file from Fortinet and copy it to the
computer that you use to connect to the web-based manager.
2 Start the web-based manager and go to System > Status > Status.
3 In the Antivirus Definitions field of the Unit Information section, select Update.
4 In the Update File field, type the path and filename for the antivirus definitions update
file, or select Browse and locate the antivirus definitions update file.
5 Select OK to copy the antivirus definitions update file to the FortiGate unit.
The FortiGate unit updates the antivirus definitions. This takes about 1 minute.
Note: If the FortiGate unit is part of an HA cluster, you should set a unique name to distinguish
the unit from others in the cluster.
Note: For information about configuring the FortiGate unit for automatic antivirus definitions
updates, see “Update center” on page 120.

Table of Contents

Other manuals for Fortinet FortiGate FortiGate-200A

Related product manuals