Fortinet FortiSIEM 500F - Log in to Bootloader Shell; Mount and Link;opt Directory; Run load_image Script

Migrating from Pre-6.1.2 FortiSIEM
1.
Log in to the bootloader shell as user root with password ProspectHills.
2.
Mount the /opt directory:
a.
Mount the /opt directory, for example:
# mount /dev/mapper/FSIEM500F-phx_opt /opt
b.
Create a symbolic link to images from opt:
# ln -sf /opt/images /images
c.
Change to the /images directory, for example:
# cd /images
d.
Run the ll command to check disk usage.
# ll
These steps are illustrated in the following screen shot.
3.
Run the load_image script to swipe the old image with the new image, for example:
a.
Change to the root directory and check the contents, for example:
# cd /
# ll
FortiSIEM 6.1.2 500F Collector Configuration Guide 19
Fortinet Technologies Inc.