Fortinet FortiSIEM 500F - Copy Configuration Files; Migrate to FortiSIEM 6.1.2

Migrating from Pre-6.1.2 FortiSIEM
b.
Run the load_image script, for example:
# sh load_image
c.
Press Return again when the load_image script finishes.
d.
Reboot your system manually if it does not do so automatically.
Migrate to FortiSIEM 6.1.2
Follow these steps to complete the migration process:
1.
Log in to the bootloader shell as user root with password ProspectHills. You will immediately be asked to
change your password.
2.
Create and mount the /images directory from /opt:
a.
Change directory to root, for example:
# cd /
b.
Mount the opt directory, for example:
# mount /dev/mapper/FSIEM500F-phx_opt /opt
c.
Create images directory under /:
# mkdir -p /images
d.
Copy backup files to /images directory from /opt/images directory:
# cd /opt/images
FortiSIEM 6.1.2 500F Collector Configuration Guide 20
Fortinet Technologies Inc.