Fortinet FortiSIEM 500F - Run Configuration Command; Step 5: Register Collectors

Appliance Setup
The options are described in the following table.
Option Description
-r The FortiSIEM component being configured
-z The time zone being configured
-i IPv4-formatted address
-m Address of the subnet mask
-g Address of the gateway server used
--host Host name
-f FQDN address: fully-qualified domain name
-t
The IP type. The values can be either
4
(for
ipv4
)
or
6
(for
v6
)
Note:
the
6
value is not currently
supported.
--dns1, --dns2 Addresses of the DNS server 1 and DNS server 2.
-o Installation option.
-z Time zone. Examples of possible values are
US/Pacific
,
Asia/Shanghai
,
Europe/London
,
or
Africa/Tunis
--testpinghost The URL used to test connectivity
Once the configuration is complete, the system reboots automatically.
Step 5: Register Collectors
Collectors can be deployed in Enterprise or Service Provider environments.
l
Enterprise Deployments
l
Service Provider Deployments
Enterprise Deployments
For enterprise deployments, follow these steps:
FortiSIEM 6.1.2 500F Collector Configuration Guide 9
Fortinet Technologies Inc.