Fortinet FortiSIEM 500F - Configure Network Settings; Step 10: Test Network Connectivity; Step 11: Final Configuration Confirmation

Appliance Setup
Note the IP Address—you will need it in a later step.
Option Description
Host Name Collector's host name
IPv4 Address The Collector's IPv4 address
NetMask The Collector's subnet
Gateway Network gateway address
FQDN Fully-qualified domain name
DNS1, DNS2 Addresses of DNS server 1 and DNS server 2
10.
Test network connectivity by entering a host name that can be resolved by your DNS Server (entered in the previous
step) and responds to ping. The host can either be an internal host or a public domain host like google.com. For
the migration to complete, the system still needs https connectivity to FortiSIEM OS update servers: os-pkgs-
cdn.fortisiem.fortinet.com and os-pkgs-c8.fortisiem.fortinet.com. Press Next.
11.
The final configuration confirmation is displayed. Verify that the parameters are correct. If they are not, then press
Back to return to previous dialog boxes to correct any errors. If everything is OK, then press Run.
FortiSIEM 6.1.2 500F Collector Configuration Guide 8
Fortinet Technologies Inc.