Fortinet FortiSIEM 500F - Select City for Timezone; Step 7: Select 1 Collector; Step 8: Select Operation for Collector; Step 9: Enter Network Component Information

Appliance Setup
6. Select the Country and City for your timezone, and press Next.
7. Select 1 Collector. Press Next.
8. If you want to enable FIPS, then choose 2 install_with_fips. Otherwise, choose 1 install_without_fips. You
have the option of enabling FIPS (option 3) or disabling FIPS (option 4) later.
9. When prompted, enter the information for these network components to configure the Static IP address: IP
Address, Netmask, Gateway, DNS Server(s).Configure the network by entering the following fields.
Press Next.
FortiSIEM 6.1.2 500F Collector Configuration Guide 7
Fortinet Technologies Inc.