Fortinet FortiSIEM 500F - Table of Contents

To Next Page

To Previous Page

TABLEOFCONTENTS

Appliance Setup 4

Fresh Installation 4

Step 1: Rack mount the FSM-500F Appliance 4

Step 2: Power On the FSM-500F Appliance 4

Step 3: Verify System Information 4

Step 4: Configure FortiSIEM via GUI 5

Step 5: Register Collectors 9

Step 6: Using FortiSIEM 12

Factory Reset 13

Step 1: Uninstall FortiSIEM application 13

Step 2: Reinstall FortiSIEM application 13

Upgrading FortiSIEM Collector 13

Appliance Re-image 13

Step 1: Create Bootable Linux Image 14

Step 2: Copy FortiSIEM Collector image to USB 14

Step 3: Prepare 500F by removing FSM 14

Step 4: Configure 500F BIOS to Boot into USB Drive 15

Step 5: Re-image 500F boot drive from USB Linux 15

Migrating from Pre-6.1.2 FortiSIEM 16

Pre-Migration Checklist 16

Migrate Collector Installation 16

Download the Bootloader 16

Prepare the Bootloader 17

Load the FortiSIEM 6.1.2 Image 18

Migrate to FortiSIEM 6.1.2 20

Restore the HTTPPassword File From Backup 24

Re-Register to the Supervisor 24

Reboot the Appliance 25

FortiSIEM 6.1.2 500F Collector Configuration Guide 3

Fortinet Technologies Inc.