3
Preparation Before Washing
1. Adjust the adjustable foot knob to make sure the washer is placed stably.
Adjustable foot knob (extend when clockwise rotating and shorten when
anti-clockwise rotating): Slightly incline the washer first and loosen the
adjustable foot knob. Adjust the adjustable foot knob so as to ensure four
comers of the washer are steadily contacted with the ground. Tighten the
adjustable foot knob to lock them. If the ground is obviously not flat, please
fix the ground or choose another flat ground surface for placing, otherwise
the washer barrel will incline and knock the cabinet.
2. Install the water inlet hose.
3. Connect with the power source.
4. Open the water tap.
5. Put down the drain hose.
Upper drain
Note: The water will overflow when the height of
the drain hose is under 750mm.
6. Put in clothes and suitable amount of washing powder or
detergent.
Note:
Before washing, please take out coins, keys and other hard goods first, and close the zipper to
prevent clothes and barrel from damage.
To Next Page
Loading...
