Forza FDC-003K - 3-3. Audible Alarm; 3-5. UPS Parameter Settings

Three parameters need to be configured
in order to set up the UPS. Refer to
following diagram.
Parameter 1: it is used for the different
configuration options. There are 10
programs to set up. Refer to the table
below.
Parameter 2 and parameter 3: they
represent the setting options or values of
each program.
3-3. Audible alarm
3-4. Abbreviations on the LCD display
3-5. UPS parameter settings
Battery mode
Low battery
Overload
Fault
Bypass mode
Beeps once every 4 seconds
Beeps once every second
Beeps twice every second
Beeps continuously
Beeps every 10 seconds
ENA
DIS
ESC
HLS
LLS
BAT
CF
EP
TP
CH
Enable
Disable
Escape
High line transfer
Low line transfer
Battery
Converter
EPO
Temperature
Charger
Abbreviation Display content Meaning
Parameter 1
Parameter 2 Parameter 3