08: Enable/Disable programmable outlets
09: Backup time setting for programmable outlets
10: Backup time setting for outlets
00: Exit setting
Interface Setting
Parameter 3: Activates or cancels the programmable
outlet feature.
ENA: Programmable outlets enabled
DIS: Programmable outlets disabled
Interface Setting
Parameter 3: Sets the backup time limits for the
programmable outlets.
0-999: Use this setting to define the programmable outlets
backup time in minutes, from 0-999, in order to connect
non-critical devices on battery mode.
Interface Setting
Parameter 3: Sets up backup interval on battery mode
for default outlets.
0-999: Use this setting to define the default outlets backup
interval in minutes, from 0-999, to operate on battery mode.
0: When this parameter is set to “0”, the backup interval will
only last 10 seconds.
999: When this parameter is set to “999”, the backup interval
will be disabled.
To Next Page
Loading...
