1.5 SD Card Management
This camera supports Micro SD Card.
When you plug in the SD card during the camera work process, please reboot the camera again, or else the
SD card might not work well.
On Foscam app go to the SettingsDevice StatusDevice Status page, you can see the SD card status.
1.6 Add Device: Connection via the Foscam App
Scan the QR code below to download and install the Foscam APP.
Please refer to the Quick Setup Guide.
1.7 Installation
Please refer to the Quick Setup Guide.
Step 1: Rotate the base of the camera until points a and b are aligned, this allows for the mounting plate
be removed.
Step2: Install the mounting plate on a wall or ceiling with supplied fixing screws.
Step3: Align points a and b to insert the camera base to the mounting plate. Rotate so that points a and b
no longer aligned, this attaches the camera securely to the base.