Add: Select one preset points and add it to the selected cruise track.
Delete: Select one preset points you have added to one cruise track, click Delete.
Move up / down: Select one cruise track, adjust the order of preset points in one cruise track.
Attention: Considering the life time and thermal issue of the motor, it's not recommend to do long-time cruise.
4.7.3 Start-Up Options
Here section will allow you to set the stop position after the camera reboots.
It supports three modes: Disable Start-Up, Go to Home Position and Go to Guard Position.
Disable Start-Up: When rebooting, the camera will not pan / tilt.
Go To Home Position: When rebooting, the camera will providing Video Management System to manage or
monitor multi-cameras Pan / Tilt and stops at center.
Go To Guard Position: Select one preset position and save it. When rebooting, the camera will pan / tilt and
stops at the preset position you have set.
4.7.4 Guard Position Settings
After setting the guard position, your camcorder will automatically return to the guard position within a
predetermined time (manually setting) when it stops moving (manually or cruise). You could refer to the
following method:
To Next Page
Loading...
