Foscam G4 - Remote Internet Access (WAN); Streaming with VLC Player

8
2.2.2 Wireless Connection
Only some models support EZLink wireless connection , please refer to the Quick Setup Guide.
2.3 Access the Camera in WAN
2.3.1 Static IP Addresses
Users with static IP addresses after you have finished connecting the camera using the LAN IP address and
port forwarding, you can access the camera directly from Internet using the WAN IP address and port number.
How to Obtain the WAN IP address from a public website ?
To obtain your WAN IP address, enter the following URL in your browser: http://www.whatismyip.com.The
webpage at this address will show you the current WAN IP.
2.4 Using the VLC Player
This camera supports RTSP streaming, here you can view the camera using VLC player.
RTSP URL rtsp:// [user name][:password]@IP:port number/videosream
The part in the square brackets may be omitted.
user name & password:
The user name and password to access the camera. This part can be omitted.
IP: WAN or LAN IP address.
port number: If there is the RSTP port number on the Port page, you must only use RTSP port number.
otherwise, you must only use http port number.
Videostream: Here support three modes: videoMain, videoSub and audio. When the network speed is bad,
here you had better select videoSub. If you select audio, you can only hear the sound but cannot see the
video.