4.4 Network
This section will allow you to configure your camera's IP, Wireless Settings, Port, Mail Settings and FTP
Settings.
4.4.1 IP Configuration
If you want to set a static IP for the camera, please go to IP Configuration page. Keep the camera in the same
subnet of your router or computer.
Changing settings here is the same as using the Equipment Search Tool.
It is recommended that you use the subnet mask, gateway and DNS server from your locally attached PC. If
you don't know the subnet mask, gateway and DNS server, you can check your computer's local area
connection as follows:
Control Panel > Network Connections > Local Area Connections > Choose Support > Details.
To Next Page
Loading...
