Note:
You can also select other security modes as you need.
WPS
Wi-Fi Protected Setup makes it easy for home users who know little of wireless security to establish a home network, as well as to add new
devices to an existing network without entering long passphrases or configuring complicated settings. Simply enter a PIN code or press the
software PBC button or hardware WPS button (if any) and a secure wireless connection is established.
Operation Instructions:
PBC: To use WPS-PBC, try the way below:
Press the hardware WPS button on the router for about 1 second and then enable WPS/PBC on the client device within 2 minutes.
To Next Page
Loading...