IMPORTANT PARAMETER CHANGE INFORMATION
AS OF 27
th
SEPTEMBER 2010 HR410 AND LR410 WILL HAVE ONLY THE PARAMETERS AS STATED
BELOW.
THIS WAS PUT INTO PLACE TO STOP PARAMETERS BEING MODIFIED THAT WOULD CAUSE
SEBSEQUENT ISSUES AND REQUIRE SERVICE VISITS
410 Economy Cabinets
The cabinets are manufactured as a one piece formed shell with the condensing unit located on the base of the
cabinet. They conform to ISO Climate Class 4 (32
0
c with 40% RH).
Temperature is controlled by a LAE microprocessor controller with digital temperature display. The units‟
refrigeration system is integral with an air-cooled compressor and static condenser with the refrigerant distribution
into the evaporator controlled by capillary.
Also the condensation vaporisation is provided by a self contained condensate vaporiser tray attached to the top of
the compressor.
The low temperature units refrigeration is provided by static freezer shelves requiring manual defrost.
The doors are fitted with pivot hinges, stainless steel door handle and magnetic door gasket.
All models are fitted with roller castors to the rear and M8 adjustable levelling bolts to front.
On glass door models the interior light is fitted to the top of the storage area at the front. The on/off switch is
incorporated in the light.
Nomenclature based on –
H = High Temperature.
L = Low Temperature.
R = Refrigerator.
410 = Net Capacity (litres).
G = Glass Door
Temperatures and Capacities
To Next Page
Loading...
