Need help?Do you have a question about the Foster Solo Plus and is the answer not in the manual?
General| Brand | Foster |
|---|---|
| Model | Solo Plus |
| Category | Refrigerator |
| Language | English |
Explanation of the compressor status indicator.
Explanation of the evaporator fan status indicator.
Explanation of the defrost status indicator.
Explanation of the alarm status indicator.
Step-by-step guide to set the desired temperature.
Procedure for accessing and changing unit parameters.
Detailed explanations of each adjustable parameter.
Causes and indicators for high-temperature conditions.
Causes and indicators for low-temperature conditions.
Causes and indicators for high-pressure faults.
Causes and indicators for room sensor malfunctions.
Causes and indicators for defrost sensor malfunctions.
Causes and indicators for condenser sensor malfunctions.
Causes and indicators for condenser temperature issues.
Steps to diagnose and resolve compressor stoppage issues.
Troubleshooting steps for evaporator icing.
Steps to resolve a blank unit display.
Steps to access the parameter adjustment mode.
Detailed procedure for changing parameter values.
How to save modified parameter settings.
Selection of defrost method (electric, hot gas, etc.).
Sets the frequency between defrost cycles.
Temperature for terminating defrost.
Maximum duration allowed for a defrost cycle.
Activates defrost upon unit power-up.
Delay before defrost starts after reset.
Controls how evaporator fans operate.
Sets temperature for fan deactivation.
Forces fans off when compressor is inactive.
Defines fan behavior during defrost cycles.
Duration fans remain off after dripping phase.
Instructions for operating the unit with an emergency system.
Guidelines for cleaning the unit to maintain performance.
To Next Page
