20
ROOM TEMPERATURE SETTINGS.
Set the required room temperature.
With the unit in normal operating mode press the SET key to display the set temperature.
To change the value press either the UP/DEFROST key or the DOWN/INTERIOR LIGHT key.
Once you have reached the desired setting press SET key to confirm and store the change.
INSTRUCTION FOR PARAMETER MODIFICATION
ACCESSING THE PARAMETERS
Press and hold the ENTER key for 5 seconds.
“00” will be displayed.
Press the UP/DEFROST key till it displays “22”
The first parameter to be changed will be displayed.
Press the UP/DEFROST key or the DOWN/INTERIOR LIGHT key to scroll through the
parameters.
Press the SET key to display the value of the parameter selected.
To change the value press either the UP/DEFROST key or the DOWN/INTERIOR LIGHT key
until you reach the new value.
9. ON/OFF key: When pressed for 2 seconds it turns the unit off or on.
10. ENTER key: Allows access to the menu and submenus.
Access to the programming mode should only be attempted after reading and fully
understanding the service manual, as inserting incorrect information will effect the operation of
the unit.
To Next Page
Loading...
