Need help?Do you have a question about the Fourgroup Xtreme Series and is the answer not in the manual?
General| Brand | Fourgroup |
|---|---|
| Model | Xtreme Series |
| Category | Control Panel |
| Language | English |
Instructions for connecting the main power supply to the control panel.
Guidelines for connecting the motor power supply and checking rotation direction.
Activates/deactivates the 4-20mA signal reading device for operation.
Allows the user to set/modify the password for programming menu access.
Allows setting all parameters related to pump 1.
Sets delays for maximum/minimum current and Coso alarms.
Enables/disables and sets time limit for continuous pump operation alarm.
Enables/disables and sets limit for pump starts per minute.
Enables/disables and sets limit for pump starts per hour.
Enables/disables and sets limit for pump Klixon events.
Enables/disables and sets working hours for pump service maintenance alarm.
Automatically sets main electrical parameters for pump 1.
Sets the maximum and minimum allowed current consumption for pump 1.
Sets minimum allowed Coso value for pump 1 (dry running indication).
Mode for waste/clean water systems, pump starts controlled by float switch.
Mode for clean/waste water systems, controlled by float/pressure switches.
Mode controlled by 4-20mA signal for level/pressure.
Mode managing pump operation with defined pause and work times.
Sets float switch or sensor location for operating modes.
Enables or disables specific operating programs (DARK, CLEAN, DIGIT).
Configures starting cycle, pause time, and work time for PAUSE/WORK mode.
Activates/deactivates the PAUSE/WORK operating program for all pumps.
Sets operating mode and alarm activation for the audio output.
Sets operating mode for the visual alarm output.
To Next Page
