29
BANDSAW (F28-191 Model)
Index
• Safety instructions 30
• General safety instructions 31
• Specific safety instructions for bandsaws 33
• Environment protection 34
• Symbols 34
• Electrical connections 35
• Recommended use 36
• Technical specifications 37
• Noise conditions 37
• Removal of package 37
• Machine description 38
• Assembly of the bandsaw 39
I. Bandsaw fastening 39
II. Workbench assembly 39
III. Workbench adjustment 40
IV. Assembly of fence’s rail 40
V. Assembly of the rip fence 40
VI. Connection of the dust collection device 41
• Protection of the blade 41
I. Upper protection of the saw blade 41
II. Lower protection of the saw blade 42
III. Flywheels’ doors 42
• Functioning 42
I. ON / OFF switch 43
II. Saw blade’s tension 43
III. Knob for the adjustment of saw blade’s position 43
IV. Speed adjustment 44
V. Knob for the adjustment of driving belt 44
VI. Adjustment of workbench’s inclination 44
VII. Rip fence 44
VIII. Cutting 45
• Assembly of the blade and adjustments 46
V. Replacement of the saw blade 47
VI. Adjustment of the saw blade 47
VII. Adjustment of the upper blade guide 47
VIII. Adjustment of the lower blade guide 48
• Maintenance 50
I. General regulations 50
II. Replacement of the flywheels’ coatings 50
III. Replacement of the bench inlay 50
• Malfunctions 51
• After sales service 52
To Next Page
Loading...
