49
2. Loosen the workbench (70) from its support (71).
3. Remove the workbench.
4. Loosen the screw (72) in order that the support plate can be easily moved back and
forth.
5. Loosen the screw (73).
6. Place the support (74) in order that blade guides (75) are about 1 mm far from teeth’s
base.
7. Tighten the screw (73) firmly.
8. Loosen the screws (76) by using an hexagonal key.
9. Press the guides (77) against the blade.
10. Turn clockwise the saw blade flywheel by hand in order that the guides settle in the
correct position (they must touch lightly the saw blade).
11. Tighten the screws firmly (76).
To Next Page
Loading...
