20
3
This item is used to enable/disable the quiet boot.
[Disabled] : Displays the normal POST messages.
[Enabled] : Displays OEM customer logo instead of POST messages.
While Enabled, this option allows BIOS to skip certain tests while booting, this will shorten the
time needed to boot the system.
This item denes if the keyboard Num Lock key is active when your system is started. The
available settings are: On (default) and Off.
This option is used to select the priority for boot devices. After pressing <Enter>, you can
select the device using the Up/Down arrow keys, and change the device priority using <+> or
<->; you can exit this menu by pressing <Esc>.
This option is used to specify the boot priority sequence from available hard disk drives.
This option is used to specify the boot priority sequence from available removable drives.
This option is used to specify the boot priority sequence from available CD/DVD drives.
Press <Enter> to go to its submenu.
Trusted Computing Group (TCG) members develop and promote open, vendor-neutral,
industry standard specications for trusted computing building blocks and software interfaces
across multiple platforms
TPM (Trusted Platform Module) is a specication promoted by TCG. A Trusted Platform Mod-
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
Trusted Computing
Trusted ComputingTrusted Computing Help Item
TCG/TPM SUPPORT [No] Enable / Disable TPM
TCG (TPM 1.1/1.2)
support in BIOS
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[No]
To Next Page
Loading...
Need help?
General
