Foxconn G41MX 2.0 User Manual

3
35
Integrated Peripherals
► IDE Configuration/OnBoard Configuration/SuperIO Configuration/USB Configuration
Press <Enter> to go to relative submenu.
IDE Conguration
► SATA Controller
This item allows you to select the mode of the SATA ports. Setting values are: [Disabled],
[Compatible], [Enhanced].
► Configure SATA Channels
This item allows you to congure the location of SATA ports in "System Information" menu.
Setting values are: [Before PATA] and [Behind PATA]. When set to [Before PATA], SATA drives
are displayed as Primary IDE Master/Slave and Secondary IDE Master/Slave in "System
Information" menu; when set to [Behind PATA], SATA drives are displayed as Secondary IDE
Master/Slave and Third IDE Master/Slave in "System Information" menu.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
Integrated Peripherals
► IDE Conguration
[Press Enter] Help Item
► OnBoard Conguration
[Press Enter]
► SuperIO Conguration
[Press Enter] Congure the IDE
► USB Conguration
[Press Enter] device(s) .
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Press Enter]
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
IDE Conguration
IDE Conguration
Help Item
SATA Controller
[Enhanced]
Congure SATA Channels [Before PATA]
Disabled
Compatible
Enhanced
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Enhanced]
Options

Foxconn G41MX 2.0 Specifications

General

Form Factor	Micro ATX
Chipset	Intel G41
Socket	LGA 775
Maximum Memory	8 GB
Storage Interface	4 x SATA 3Gb/s
USB Ports	8 x USB 2.0
IDE Ports	1 x ATA 100
Video Outputs	1 x VGA
Memory Slots	2 x DIMM
Expansion Slots	1 x PCIe x16, 2 x PCI
Audio	Realtek ALC662, 6-Channel
LAN	Realtek RTL8111 Gigabit Ethernet
Supported CPU	Intel Core 2 Quad, Core 2 Duo, Pentium, Celeron
Memory Type	DDR3