CD INSTRUCTION
49
2). Simple Mode :
To select which message of system settings are to be displayed in the Simple Mode. Messages
such as CPU frequency, voltage...etc., they can be displayed one by one in Simple Mode.
3). F.I.S. Calibration (FOX Intelligent Stepping, Optional)
This function will re-calibrate the CPU's loading, and it may take several minutes to proceed.
The FOX ONE calibration process will apply different loadings to your CPU, record PWM IC
voltage together with the CPU clock running at these loadings, so it can dene and estimate
within a particular range of system loading, what the CPU clock should be.
Step 1 : Click Calibration icon, a message pops out to ask for continue. Select Yes.
Step 2 : After data is collected, it will ask you to restart your computer now.
Later on, when the FOX ONE program is activated, and F.I.S. feature (in CPU Page) is also
enabled, FOX ONE will automatically adjust your CPU clock according to your system loadings.
(Loadings are like Power Gaming, Data Mining...etc.)
To Next Page
Loading...
Need help?
General
